{"id":165,"date":"2019-06-12T10:10:19","date_gmt":"2019-06-12T14:10:19","guid":{"rendered":"http:\/\/portfolio-pre.uqac.ca\/gabarit\/?page_id=165"},"modified":"2023-10-03T08:13:38","modified_gmt":"2023-10-03T12:13:38","slug":"communications-2","status":"publish","type":"page","link":"https:\/\/portfolio.uqac.ca\/xgrantchen\/communications-2\/","title":{"rendered":"Articles de Conf\u00e9rences"},"content":{"rendered":"

 <\/p>\n

2023<\/u><\/strong><\/p>\n

    \n
  1. K. Kweitsu. D.K. Sarkar, X.-G. Chen,\u00a0\u201cA Short Review on Superplasticity of Aluminum Alloys\u201d, Engineering Proceedings, 43 (2023) 43, doi.org\/10.3390\/engproc2023043043, 15th International Aluminium Conference, Qu\u00e9bec, QC, Canada, 11\u201313 October 2023<\/li>\n
  2. M. Tiwari, S. Noormohammed, X.-G. Chen,\u00a0D.K. Sarkar, \u201cSimultaneous anodization and silanization for adhesive joining of AA 3031 using an epoxy adhesive\u201d, Materialwiss. Werkstofftech. 54 (2023)1092\u201336, doi.org\/10.1002\/mawe.202100391, 6th International Conference on Mechanical, Manufacturing and Plant Engineering<\/li>\n
  3. M. Tiwari, S. Noormohammed, D.K. Sarkar, X.-G. Chen,\u00a0\u201cPolymer\u2013Aluminum Lightweight Multi-Material Joints Bonded with Mixed Adhesive\u201d, Engineering Proceedings, 43 (2023) 29, doi.org\/10.3390\/engproc2023043029, 15th International Aluminium Conference, Qu\u00e9bec, QC, Canada, 11\u201313 October 2023<\/li>\n
  4. Khoshghadam-Pireyousefan, M. Javidani, A. Maltais, J. Levesque, X.-G. Chen,\u00a0\u201cEffect of Annealing Temperature on the Microstructure, Mechanical Properties, and Electrical Conductivity of 4xxx Series Al-Based Alloys\u201d, Engineering Proceedings, 43 (2023) 14, doi.org\/10.3390\/engproc2023043014, 15th International Aluminium Conference, Qu\u00e9bec, QC, Canada, 11\u201313 October 2023<\/li>\n
  5. Qassem, D. Larouche, M. Javidani, X.-G. Chen: \u201cTensile Properties of the Subsurface and Center Regions of AA6111 Direct-Chill-Cast Ingot in Semisolid State and Their Hot Tearing Susceptibility\u201d, Engineering Proceedings, 43 (2023) 9, doi.org\/10.3390\/engproc2023043009, 15th International Aluminium Conference, Qu\u00e9bec, QC, Canada, 11\u201313 October 2023<\/li>\n<\/ol>\n
      \n
    1. Yavari, A. Algendy, M. Javidani, L. Pan, X.-G. Chen: \u201cEffects of Ni Content and Alloying Elements on Electrical Conductivity, Mechanical Properties, and Hot Tearing Susceptibility of Al-Ni-Based Alloys\u201d, Engineering Proceedings, 43 (2023) 3, doi.org\/10.3390\/engproc2023043003, 15th International Aluminium Conference, Qu\u00e9bec, QC, Canada, 11\u201313 October 2023<\/li>\n<\/ol>\n
        \n
      1. Algendy, K. Liu, P. Rometsch, N. Parson, X.-G. Chen: \u201cEffect of Sc and Zr Additions on Dispersoid Microstructure and Mechanical Properties of Hot-Rolled AA5083\u201d, In: Broek, S. (eds) Light Metals 2023, p. 1229\u20131237, TMS 2023. The Minerals, Metals & Materials Series. Springer, doi.org\/10.1007\/978-3-031-22532-1_165<\/li>\n
      2. Rometsch, J. Fourmann, E. Elgallad, X.-G. Chen: \u201cUse of Sc to Improve the Properties of AA5083 Cast and Rolled Products\u201d, In: Broek, S. (eds) Light Metals 2023, p. 1213\u20131222, TMS 2023. The Minerals, Metals & Materials Series. Springer, doi.org\/10.1007\/978-3-031-22532-1_163<\/li>\n
      3. Shao, E. Elgallad, A. Maltais, X.-G. Chen: \u201cDeveloping Al-Zr-Sc Alloys as High-Temperature-Resistant Conductors for Electric Overhead Line Applications\u201d, In: Broek, S. (eds) Light Metals 2023, p.1266-1272, TMS 2023. The Minerals, Metals & Materials Series. Springer, doi.org\/10.1007\/978-3-031-22532-1_170<\/li>\n<\/ol>\n

         <\/p>\n

        2022<\/u><\/strong><\/p>\n

          \n
        1. G. Chen: \u201cDeveloping the thermal resistant high-strength aluminum alloys via ingot metallurgy and thermomechanical process\u201d, The 18th<\/sup> International Conference on Aluminum Alloys, ICAA18, September 4-8, 2022, Yoyama, Japan<\/li>\n
        2. Zhang, A. Arici1, F. Breton, X.-G. Chen: \u201cInfluence of transition elements (zirconium, vanadium and molybdenum) on microstructure and strengthening of AlSi8Mg foundry alloys\u201d, The 18th<\/sup> International Conference on Aluminum Alloys, ICAA18, September 4-8, 2022, Yoyama, Japan<\/li>\n
        3. Li, K. Liu, and X-G. Chen: \u201cEffects of transition elements (V, Zr and Mo) on the microstructures andelevated-temperature properties in Al-Si 356 type cast alloys\u201d, The 18th<\/sup> International Conference on Aluminum Alloys, ICAA18, September 4-8, 2022, Yoyama, Japan<\/li>\n
        4. -G. Chen: \u201cHot deformation and its softening mechanisms of aluminum wrought alloys|\u201d, In: Rio Tinto Rolling Slab Global Technical Seminar, August 30 \u2013 31, 2022.<\/li>\n
        5. Cui, Z. Zhang, D. K. Sarkar, D. Kocaefe and X.-G, Chen: \u201cA study on aluminum-based lightweight entropic alloys with high strength at elevated temperature\u201d, In: Proceedings of the 61th Conference of Metallurgists, COM 2022, p. 413-423, ISBN 978-3-031-17424-7, Montreal, August 21-24, 2022<\/li>\n
        6. Khalilpoor, D. Larouche, X.G. Chen, and J. Colbert: \u201cPrediction of Hot Tearing in the AA6111 Alloy during DC Casting of Flat Ingots\u201d, In: Proceedings of the 61th Conference of Metallurgists, COM 2022, ISBN 978-3-031-17424-7, Montreal, August 21-24, 2022<\/li>\n
        7. N. Khangholi, M. Javidani, A. Maltais, X.-G. Chen: \u201cEnhanced strength and electrical conductivity of the Al-Mg-Si conductor alloys by adding Ag and applying the presaging\u201d, In: Proceedings of the 61th Conference of Metallurgists, COM 2022, p. 269-278, ISBN 978-3-031-17424-7, Montreal, August 21-24, 2022<\/li>\n
        8. M. Tiwari, S. Noormohammed, X.-G. Chen and D.K. Sarkar: \u201cOpen pore effect on structural adhesive joining using an epoxy adhesive\u201d, In: Proceedings of the 61th Conference of Metallurgists, COM 2022, p. 65-71, ISBN 978-3-031-17424-7, Montreal, August 21-24, 2022<\/li>\n<\/ol>\n

           <\/p>\n

          2021<\/u><\/strong><\/p>\n

            \n
          1. Hu, K. Liu, L. Pan, F. Breton, and X.-G. Chen: \u201cEvolution of Precipitates and Mechanical Properties in Al-Cu 224 Cast Alloys with Various Mg Additions\u201d, In: Proceedings of the 60th Conference of Metallurgists, ISBN: 978-1-926872-53-7, COM 2021, August17-19, 2021<\/li>\n
          2. Qassem, D. Larouche, M. Javidani, J. Colbert, X.-G. Chen: \u201cEffect off Cu Content on Microstructure Evolution and Semisolid Behavior of AA6111 Alloy\u201d, In: Proceedings of the 60th Conference of Metallurgists, ISBN: 978-1-926872-53-7, COM 2021, August17-19, 2021<\/li>\n
          3. Elasheri, E.M. Elgallad, N. Parson, X.-G. Chen: \u201cEffect of Two-Step Homogenization on the Evolution of Al3Zr Dispersoids in Al-0.3Mg-0.4Si-0.2Zr Alloy\u201d, In: Proceedings of the 60th Conference of Metallurgists, ISBN: 978-1-926872-53-7, COM 2021, August17-19, 2021<\/li>\n
          4. M. Tiwari, N. Saleema, X.-G. Chen, D. K. Sarkar: \u201cMechanical abrasion of AA6061-T6 alloy for the application of structural adhesive bonding\u201d, The 44th Annual Virtual Meeting-The adhesion society, February 22-25, 2021<\/li>\n
          5. Liu, A. Algendy, J. Gu, X.-G. Chen: \u201cEvolution of microstructure and dispersoids in Al-Mg 5xxx alloys under wire + arc additive manufacturing and permanent mold casting\u201d, In: TMS 2021 150th Annual Meeting & Exhibition Supplemental Proceedings. ISBN 978-3-030-65261-6, March 14-18, 2021, Orlando, FL, USA<\/li>\n
          6. M. Tiwari, N. Saleema, X.-G. Chen, D. K. Sarkar: \u201cSimultaneous anodization and silanization for adhesive joining using epoxy adhesive\u201d, International Conference on Material Characterization and Modelling (ICMCM-2021), December 13-14, 2021, Malaysia.<\/li>\n<\/ol>\n

             <\/p>\n

            2020<\/u><\/strong><\/p>\n

              \n
            1. Algendy, K. Liu, X.-G. Chen: \u201cFormation of various intermetallic phases during solidification in Al-Mg 5xxx alloys with various Mg levels\u201d, F. DeGeusure et al. (Eds), 17th International Conference on Aluminuim Alloys 2020, MATEC Web Conf. 326 (2020) 02002<\/li>\n
            2. -G. Chen: \u201cEffects of transition elements on hot deformation behaviors of aluminum wrought alloys\u201d, ICAA2020, 17th International Conference on Aluminuim Alloys, Oct 26-29, 2020, Grenoble, France<\/li>\n
            3. Liu, Z. Zhang, F. Breton, X.-G. Chen: \u201cQuench Sensitivity and Phase Transformation Kinetics of AlSi7MnMg High Pressure Vacuum Die Casting\u201d, F. DeGeusure et al. (Eds), 17th International Conference on Aluminuim Alloys 2020, MATEC Web Conf. 326 (2020) 02001<\/li>\n
            4. N. Khangholi, M. Javidani, A. Maltais, X.-G. Chen: \u201cInvestigation on electrical conductivity and hardness of 6xxx aluminum conductor alloys with different Si levels\u201d, F. DeGeusure et al. (Eds), 17th International Conference on Aluminuim Alloys 2020, MATEC Web Conf. 326 (2020) 08002<\/li>\n
            5. Li, K. Liu, and X-G. Chen: \u201cInfluence of transition elements (V, Zr and Mo) and cooling rate on the precipitation of dispersoids in Al-7Si-0.6Cu-0.35Mg foundry alloy\u201d, F. DeGeusure et al. (Eds), 17th International Conference on Aluminuim Alloys 2020, MATEC Web Conf. 326 (2020) 02003<\/li>\n
            6. Liu, C. Li, X.-G. Chen\u00a0: \u201c Evolution of microstructure and elevated-temperature properties during hot rolling and post-rolling annealing process in Al-Mg-Si 6082 alloys\u201d, F. DeGeusure et al. (Eds), 17th International Conference on Aluminuim Alloys 2020, MATEC Web Conf. 326 (2020) 03001<\/li>\n
            7. Zhang, A. Arici, D. Levasseur, F. Breton, X.-G. Chen: \u201cEnhanced mechanical properties of high pressure vacuum die castings of Al-Si-Mg foundry alloys by Zr, V and Mo additions\u201d, 124th Metalcasting Congress<\/u>, American Foundry Society, April 21-23, 2020, Cleveland, Ohio, USA<\/li>\n
            8. Heugue, D. Larouche, F. Breton, R. Martinez, X.-G. Chen, D. Massinon,: \u201c Precipitation kinetics and evaluation of the interfacial mobility of precipitates in an AlSi7Cu0.5Mg0.3 cast alloy\u201d, TMS 2020 Annual Meeting<\/u>, Feb 23-27, San Diego, CA, USA<\/li>\n
            9. Attia, K. Ragab, M. Bouazara and X.-G Chen: \u201cInfluence of thermal treatment and design parameters on the fatigue life of automotive control arm fabricated from A357 semi-solid alloy\u201d, TMS 2020 Annual Meeting<\/u>, Feb 23-27, San Diego, CA, USA<\/li>\n
            10. Chen, K. Liu, and X.-G. Chen: \u201cEffect of Mo on elevated-temperature low-cycle fatigue behavior of Al-Si 356 cast alloy\u201d, TMS 2020 Annual Meeting<\/u>, Feb 23-27, San Diego, CA, USA<\/li>\n<\/ol>\n

              2019<\/u><\/strong><\/p>\n

                \n
              1. Agbe, D. K. Sarkar, X.-G. Chen, N. Faucheux, G. Soucy, J. L. Bernier: \u201cSilver-based nanocomposite coatings on anodised aluminium surface with excellent antibacterial properties\u201d, Oral presentation in REGAL Student\u2019 Day 2019<\/u>, Oct 8-9, Quebec City, QC, Canada, Aluminum Research Centre \u2013 REGAL<\/li>\n
              2. Jann, O. Drevelle, M. Dumont, J.-L. Bernier, H. Agbe, D. K. Sarkar, X-G. Chen, G. Soucy, L.C. Fortier and N. Faucheux: \u201cDevelopment of biocidal surface technology based on anodized aluminum designed to fight nosocomial infections\u201d, In: 69th Canadian Chemical Engineering Conference (CCEC)<\/u>, October 20-23, 2019, Halifax, Canada<\/li>\n
              3. Agbe, D. K. Sarkar, X.-G. Chen, J. Jann, N. Faucheux, O. Drevelle, G. Soucy,J. L. Bernier: \u201cTunable superhydrophobic Ag-based nanocomposite coatings on Aluminium with enhanced antibacterial and anti-fouling properties\u201d, In: ICANM2019: 7th<\/sup> International Conference & Exhibition on Advanced and Nano Materials<\/u>, 12-14 August 2019, Montreal, Canada<\/li>\n
              4. Chen, K. Liu, X.-G. Chen: \u201cElevated-temperature low-cycle fatigue behaviors of Al-Si 356 and 319 foundry alloys\u201d, C. Chesonis (ed.), Light Metal 2019<\/u>, TMS, p. 251-257<\/li>\n
              5. Liu, X. Cao, A Bolouri, X.-G. Chen: \u201cEffect of Fe-rich intermetallics on tensile behavior of Al-Cu 206 cast alloys at solid and near-solid states\u201d, T. Tiryakioglu et al (ed.), Shape Casting 2019, TMS, p. 85-96<\/li>\n<\/ol>\n

                 <\/p>\n

                2018<\/u><\/strong><\/p>\n

                  \n
                1. Agbe, D. K. Sarkar, X. G. Chen, J. L. Bernier: \u201cSynthesis of Ag-base nanocomposites on anodic aluminium oxide templates: a review\u201d, In: ICANM2018: 6th<\/sup> International Conference & Exhibition on Advanced and Nano Materials<\/u>, 6-8 August 2018, Quebec City, Canada<\/li>\n
                2. Xu, K. Rajan, X. G. Chen, D. K. Sarkar: \u201cAluminum based nanostructured superhydrophobic thin films on the protections of copper against corrosion\u201d, In: ICANM2018: 6th<\/sup> International Conference & Exhibition on Advanced and Nano Materials<\/u>, 6-8 August 2018, Quebec City, Canada<\/li>\n
                3. Chen, D. K. Sarkar, X.-G. Chen: \u201cSynthesis and characterization of nanostructured Al-based layered double hydroxides in the application of supercapacitor\u201d, In: ICANM2018: 6th<\/sup> International Conference & Exhibition on Advanced and Nano Materials<\/u>, 6-8 August 2018, Quebec City, Canada<\/li>\n
                4. Liu, X.-G. Chen: \u201cImprovement in elevated-temperature properties of Al-13%Si piston alloys by dispersoid strengthening via Mn addition\u201d, In: ICAA16: 16th<\/sup> International Conference on Aluminium Alloys<\/u>, 17-21 June 2018, Montreal, Canada<\/li>\n
                5. Li, K. Liu, N. Parson, X.-G. Chen: \u201cThe effect of heat treatments on precipitation behavior of dispersoids in Al-Mg-Si-Mn alloy\u201d, In: ICAA16: 16th<\/sup> International Conference on Aluminium Alloys<\/u>, 17-21 June 2018, Montreal, Canada<\/li>\n
                6. Heugue, D. Larouche, F. Breton, R. Martinez, X.-G. Chen: \u201cPrecipitation kinetics of an AlSi7Cu3.5Mg0.1 alloy with Zr and V additions\u201d, In: ICAA16: 16th<\/sup> International Conference on Aluminium Alloys<\/u>, 17-21 June 2018, Montreal, Canada<\/li>\n
                7. Zhang, M.-Y. Liu, F. Breton, X.-G. Chen: \u201cMicrostructure and mechanical properties of alsi10mg permanent mould and high pressure vacuum die castings\u201d, In: ICAA16: 16th<\/sup> International Conference on Aluminium Alloys<\/u>, 17-21 June 2018, Montreal, Canada<\/li>\n
                8. Qin, D. Racine, K. Liu, X.-G. Chen: \u201cStrain-controlled thermo-mechanical fatigue testing of aluminum alloys using Gleeble 3800 system\u201d, In: ICAA16: 16th<\/sup> International Conference on Aluminium Alloys<\/u>, 17-21 June 2018, Montreal, Canada<\/li>\n
                9. Arici, Z. Zhang, F. Breton, X.-G. Chen: \u201cEffect of Zr and V additions on microstructure and mechanical properties of Al-Si-Mg alloy\u201d, In: ICAA16: 16th<\/sup> International Conference on Aluminium Alloys<\/u>, 17-21 June 2018, Montreal, Canada<\/li>\n
                10. Li, Z. Zhang, X.-G. Chen, H. Nagaumi: \u201cEffect of Cr on mechanical properties and microstructure of Al-Mn-Mg-Si alloys\u201d, In: ICAA16: 16th<\/sup> International Conference on Aluminium Alloys<\/u>, 17-21 June 2018, Montreal, Canada<\/li>\n
                11. Heugue, D. Larouche, F. Breton, R. Martinez, X.-G. Chen: \u201cEvaluation of the interfacial mobility of precipitates in Al-Cu cast alloy by calorimetric kinetic analysis\u201d, In: ICAA16: 16th<\/sup> International Conference on Aluminium Alloys<\/u>, 17-21 June 2018, Montreal, Canada<\/li>\n<\/ol>\n

                   <\/p>\n

                  2017<\/u><\/strong><\/p>\n

                    \n
                  1. Liu, H. Ma, X.-G. Chen: \u201cEvolution of Dispersoids and Elevated-Temperature Properties during Two-Step Heat Treatments in Al-Mn-Mg 3004 Alloys\u201d, In: COM 2017 – Conference of Metallurgists Proceedings<\/u>, Aug 27-30, 2017, Vancouver, Canada, ISBN: -1-926872-36-0, paper no. 9465<\/li>\n
                  2. A. Mirza, K. Liu, X.-G. Chen: \u201cCyclic Stress-Strain Behavior and Low Cycle Fatigue Life of AA6061 Aluminum Alloy\u201d, A.P. Ratvik (ed.), Light Metal 2017<\/u>, TMS, p.447-452<\/li>\n
                  3. Han, X.-Grant Chen: \u201cCorrosion Characteristics of Al-B4C Metal Matrix Composites in Boric Acid Solution\u201d, Materials Science Forum<\/u>, 2017, Vol. 877, p. 530-536<\/li>\n
                  4. Bolouri, X.-Grant Chen: \u201cTensile Deformation Behavior of Al-Cu 206 Cast Alloys near the Solidus Temperature\u201d, Materials Science Forum<\/u>, 2017, Vol. 877, p. 90-96<\/li>\n<\/ol>\n

                     <\/p>\n

                    2016<\/u><\/strong><\/p>\n

                      \n
                    1. A. Laurin, N. Parson, X.-Grant Chen: \u201cImproved Boralcan\u2122 MMC Materials for Elevated Temperature Applications\u201d, In: Proceedings of the 18th International Symposium on the Packaging and Transportation of Radioactive Materials (PATRAM 2016), <\/u>Sept 18-23, 2016, Kobe, Japan, paper no. 1051<\/li>\n
                    2. Pan, K. Liu, F. Breton and X.-Grant Chen: \u201cEffects of Minor Alloying Elements on Microstructure and Creep Properties of 8xxx Aluminum Conductor Alloys\u201d, In: IMPC 2016: XXVIII International Mineral Processing Congress Proceedings<\/u>, 11-15 Sept 2016, Qu\u00e9bec city, Canada,\u00a0 ISBN: 978-1-926872-29-2, paper no. 1012<\/li>\n
                    3. Huang, D. K. Sarkar and X.-Grant Chen: \u201cStudies of Compositional and Corrosion Properties of Nanostructured Superhydrophobic Thin Films On Aluminum Substrates\u201d, In: IMPC 2016: XXVIII International Mineral Processing Congress Proceedings<\/u>, 11-15 Sept 2016, Qu\u00e9bec city, Canada, ISBN: 978-1-926872-29-2, paper no. 1020<\/li>\n
                    4. Xiong, D. K. Sarkar and X.-Grant Chen: \u201cElectrochemical Impedance Spectroscopy (EIS) Studies Of Selfassembled Monolayers (SAM) on Aluminum Substrates\u201d In: IMPC 2016: XXVIII International Mineral Processing Congress Proceedings<\/u>, 11-15 Sept 2016, Qu\u00e9bec city, Canada, ISBN: 978-1-926872-29-2, paper no. 1021<\/li>\n
                    5. Bolouri and X.-Grant Chen: \u201cTensile Deformation Behavior of Al-Cu 206 Cast Alloys near the Solidus Temperature\u201d, \u201d, In: ICAA15: 15th<\/sup> International Conference on Aluminium Alloys<\/u>, 12-16 June 2016, Chongqing, China<\/li>\n
                    6. Han and X.-Grant Chen: \u201cCorrosion Characteristics of Al-B4C Metal Matrix Composites in Boric Acid Solution\u201d, In: ICAA15: 15th<\/sup> International Conference on Aluminium Alloys<\/u>, 12-16 June 2016, Chongqing, China<\/li>\n
                    7. Liu, A.M. Nabawy, X.-G. Cen: \u201cInfluence of TiB2<\/sub> nanoparticles on the elevated-temperature properties of Al-Mn-Mg 3004 alloy\u201d, In: ICAA15: 15th<\/sup> International Conference on Aluminium Alloys<\/u>, 12-16 June 2016, Chongqing, China<\/li>\n
                    8. Li, Z. Zhang, X.-G. Chen: \u201cEffect of Magnesium on Dispersoid Strengthening of Al-Mn-Mg-Si 3xxx Alloys\u201d, In: ICAA15: 15th<\/sup> International Conference on Aluminium Alloys<\/u>, 12-16 June 2016, Chongqing, China<\/li>\n<\/ol>\n

                       <\/p>\n

                      2015<\/u><\/strong><\/p>\n

                        \n
                      1. J. Shi, X.-G. Chen: \u201cEffects of Zr and V Micro-Alloying on Activation Energy during Hot Deformation of 7150 Aluminum Alloys\u201d, In: The proceedings of Light Metals 2015<\/u>, TMS 2015, edited by M. Hyland, p. 163-167<\/li>\n
                      2. Liu, X. Cao, X.-G. Chen: \u201cEffect of Fe on the Evolution of Microstructure and Elevated Temperature Properties in Al-Mn-Mg 3004 Alloys\u201d, In: COM 2015 – Conference of Metallurgists Proceedings<\/u>, 23-26 Aug 2015, Toronto, Canada, ISBN: 978-1-926872-32-2, paper no. 8889<\/li>\n
                      3. M. Elgallad, P. Shen, X.-G. Chen: \u201cA Novel Heat Treatment Practice for Al-3%Cu-1%Mg DC Cast Ingot Plates\u201d, In: COM 2015 – Conference of Metallurgists Proceedings<\/u>, 23-26 Aug 2015, Toronto, Canada, ISBN: 978-1-926872-32-2, paper no. 8747<\/li>\n<\/ol>\n

                         <\/p>\n

                        2014<\/u><\/strong><\/p>\n

                          \n
                        1. Liu, X. Cao, X.-G. Chen: \u201cRole of iron-rich intermetallics in aluminum-copper 206 cast alloys during tensile deformation\u201d, In: COM 2014 – Conference of Metallurgists Proceedings<\/u>, Sept 28 to Oct 1, 2014, Vancouver, Canada, ISBN: 978-1-926872-24-7, paper no. 8360<\/li>\n
                        2. R. Farkoosh, X.-G. Chen and M. Pekguleryuz: \u201cThe formation of Al-(Fe,Mo)-Si dispersoid phase during solution heat treatment of an Al-Si-Cu-Mg-(Mo) casting alloy and its effect on strength and creep resistance\u201d In: COM 2014 – Conference of Metallurgists Proceedings<\/u>, Sept 28 to Oct 1, 2014, Vancouver, Canada, ISBN: 978-1-926872-24-7, paper no. 8579<\/li>\n
                        3. M. Nabawy, X.-G. Chen: \u201cManufacturing Al-TiB2 nanocomposites with K2ZrF6 flux-assisted melt stirring\u201d In: COM 2014 – Conference of Metallurgists Proceedings<\/u>, Sept 28 to Oct 1, 2014, Vancouver, Canada, ISBN: 978-1-926872-24-7, paper no. 8376<\/li>\n
                        4. Liu, X. Cao, X.-G. Chen: \u201cEvolution of iron-rich intermetallics in aluminum-copper 206 cast alloys\u201d, In: COM 2014 – Conference of Metallurgists Proceedings<\/u>, Sept 28 to Oct 1, 2014, Vancouver, Canada, ISBN: 978-1-926872-24-7, paper no. 8361<\/li>\n
                        5. Qin, Z. Zhang, X.-G. Chen: \u201cEffect of hot deformation on microstructure and mechanical properties of Al-B4C composite containing Sc\u201d, In: The proceedings of 14th International Conference on Aluminum Alloys (ICAA14)<\/u>, June 15-19, 2014, Trondheim, Norway, p. 821-826<\/li>\n
                        6. Pan, B. Bourassa, X.-G. Chen: \u201cEffect of thermomechanical processing on electrical and mechanical properties of aluminum conductor alloys\u201d, In: The proceedings of 14th International Conference on Aluminum Alloys (ICAA14)<\/u>, June 15-19, 2014, Trondheim, Norway, p. 1121-1126<\/li>\n<\/ol>\n

                           <\/p>\n

                          2013<\/u><\/strong><\/p>\n

                            \n
                          1. Shen, E.M. Elgallad, X.-G. Chen: \u201cOn the Aging Behavior of AA2618 DC Cast Alloy\u201d, In: The proceedings of Light Metals 2013: Aluminum Alloys: Fabrication, Characterization and Applications<\/u>, TMS 2013, 3-7 March 2013, San Antonio, USA, p. 373-377<\/li>\n
                          2. Liu, X. Cao, X.-G. Chen: \u201cEffect of Cooling Rate on Iron-rich Intermetallic Phases in 206 Cast Alloys\u201d, In: The proceedings Light Metals 2013: Aluminum Alloys: Fabrication, Characterization and Applications<\/u>, TMS 2013, 3-7 March 2013, San Antonio, USA, p. 311-316<\/li>\n
                          3. M. Nabawy, X.-G. Chen: \u201cMelt Processing of Al-TiB2 Nanocomposite Materials\u201d, In: The proceedings of the 8th<\/sup> Pacific Rim International Congress on Advanced Materials and Processing<\/u>, August 4-9, 2013, Waikoloa, Hawaii, USA, p. 2353-2361<\/li>\n
                          4. M. Nabawy, Z. Zhang, X.-G. Chen: \u201cSynthesis of Al-TiB2 Nanocomposite Using High Frequency Induction Melting\u201d, In: The proceedings of Materials Science and Technology (MS&T 2013)<\/u>, October 27-31, 2013, Montreal, Quebec, Canada, p. 1284-1293<\/li>\n
                          5. Zhang, G. Li, X.-G. Chen\u00a0: \u201cCharacterization of Fir-Tree Zone In AA1050 DC Cast Ingot\u201d, In: The proceedings of Materials Science and Technology (MS&T 2013)<\/u>, October 27-31, 2013, Montreal, Quebec, Canada, p. 1187-1194<\/li>\n
                          6. Ying Huang, D. K. Sarkar, X-Grant Chen: \u201cFabrication of Superhydrophobic Aluminum Surfaces by Chemical Etching and Electrophoretic Deposition Processes for Corrosion Application\u201d, In: The proceedings of Materials Science and Technology (MS&T 2013)<\/u>, October 27-31, 2013, Montreal, Quebec, Canada, p. 2297-2284<\/li>\n
                          7. R. Farkoosh, X.-G. Chen and M. Pekguleryuz: \u201cThe Effects of Mg, Mo And Cr on the Microstructure and Elevated Temperature Mechanical Properties of an Al-Si-Cu-Mg Alloy\u201d In: The proceedings of Materials Science and Technology (MS&T 2013)<\/u>, October 27-31, 2013, Montreal, Quebec, Canada, p. 1220-1227<\/li>\n
                          8. Marchand, J.-A. Laurin, M. Roux, X-G. Chen: \u201cBORALCANTM<\/sup>, an Advanced Cast Aluminium Product for Nuclear Application\u201d, In: The proceedings of the 12th<\/sup> International Aluminum Conference<\/u>, October 21-23, 2013, Montreal, Quebec, Canada, p. 407-414<\/li>\n<\/ol>\n

                             <\/p>\n

                            2012<\/u><\/strong><\/p>\n

                              \n
                            1. J. Shi, X.-G. Chen: \u201cHot Deformation Behavior and Microstructural Evolution of Homogenized 7150 Aluminum Alloys Micro-Alloyed With Zr And V\u201d, In: The proceedings of 13th<\/sup> International Conference on Aluminum Alloys (ICAA13)<\/u>, June 3-7, 2012, Pittsburgh, USA, p. 1599-1605<\/li>\n
                            2. Zhang, G. Li, X.-G. Chen: \u201cIdentification and Distribution of Fe Intermetallic Phases in AA5657 DC Cast Ingots\u201d, In: The proceedings of 13th<\/sup> International Conference on Aluminum Alloys (ICAA-13)<\/u>, June 3-7, 2012, Pittsburgh, USA, p. 1857-1863<\/li>\n
                            3. Saleema, P. Gauthier, X.-G. Chen: \u201cCorrosion Fatigue Mechanism on Hot-Forged AA6082 Aluminum Alloy\u201d, In: The proceedings of 13th<\/sup> International Conference on Aluminum Alloys (ICAA-13)<\/u>, June 3-7, 2012, Pittsburgh, USA, p. 397- 403<\/li>\n
                            4. M. Elgallad, A. Hekmat-Ardakan, F. Ajersch, X.-G. Chen: \u201cMicrostructure and Mechanical Properties of AA2195 DC Cast Ingot Plates\u201d, In: The proceedings of 13th<\/sup> International Conference on Aluminum Alloys (ICAA-13)<\/u>, June 3-7, 2012, Pittsburgh, USA, p. 1865-1871<\/li>\n<\/ol>\n

                               <\/p>\n

                              2011<\/u><\/strong><\/p>\n

                                \n
                              1. M. Han, D. Gallant, and X.G. Chen: \u201cCorrosion Behaviour of Al-B4<\/sub>c Metal Matrix Composites in H3<\/sub>BO3<\/sub>, K2<\/sub>SO4<\/sub> and Nacl Solutions\u201d, In: Light Metal Proceedings 2011<\/u>, edited by M. Fafard, G. Dufour, COM 2011, MetSoc, p. 415-425<\/li>\n
                              2. Hekmat-Ardakan,F. Ajersch, X.-G. Chen and M. Tebib: \u201cDevelopment of hypereutectic Al-Si casting alloys with variable mg content\u201d, In: Light Metal Proceedings 2011<\/u>, edited by M. Fafard, G. Dufour, COM 2011, MetSoc, p. 439-449<\/li>\n
                              3. Guo, P. Gougeon, F. Nadeau, X.-G. Chen\u00a0: \u201cPotential of laser welding and friction stir welding for joining AA1100-16 vol.% B4<\/sub>C metal matrix composite\u201d, In: Innovation in joining of advanced materials<\/u>, edited by P. Wanjara et al, COM 2011, MetSoc, p. 15-26<\/li>\n
                              4. Gautier, M. Fortier,E. Ghali, A. Charette and X.-G. Chen: \u201cCorrosion behavior of forged AA6082 aluminum alloy from different feedstock\u201d, In: Light Metal Proceedings 2011<\/u>, edited by M. Fafard, G. Dufour, COM 2011, MetSoc, p. 437-438<\/li>\n
                              5. Liu, X. Cao, X.-G. Chen\u00a0: \u201cEffect of Mn And Si on Iron-Containing Intermetallics in Cast 206 Aluminum Alloys\u201d, In: Light Metals \u2013 Advances in Materials and Processes<\/u>, edited by D. Gallienne, M. Bilodeau, COM 2010, MetSoc, p. 113-120<\/li>\n
                              6. M.A. Mohamed, M. Fortier, X.-G. Chen: \u201cEffect of Zr on Primary Intermetallic Formation And Grain Refinement of 7003 Alloy\u201d, In: Light Metals \u2013 Advances in Materials and Processes<\/u>, edited by D. Gallienne, M. Bilodeau, COM 2010, MetSoc, p. 13-21<\/li>\n
                              7. Zhang, K. Fortin, A. Charette, X.-G. Chen: \u201cEffect of Mg on Fluidity and Microstructure of Al-12%B4<\/sub>C Composites\u201d, In: Proceedings of the 12th International Conference on Aluminium Alloys (ICAA 12)<\/u>, 5-9 September 2010, Yokohama, Japan, p. 739-744<\/li>\n
                              8. Kocaefe, A. Sarkar, X.-G. Chen: \u201cWetting of Various Interfacial Reaction Products Formed during Al-B4c Composite Preparation by Aluminum\u201d, In: Light Metals \u2013 Advances in Materials and Processes<\/u>, edited by D. Gallienne, M. Bilodeau, COM 2010, MetSoc, p. 357-369<\/li>\n
                              9. Huang, D. K. Sarkar and X.-G. Chen: \u201cFabrication of Nanostructured Superhydrophobic Copper by a One-Step Process\u201d, in: Proceedings of the International Conference on Nanotechnology: Fundamentals and Applications<\/u>, Ottawa, Ontario, Canada, 4-6 August 2010, p. 480-1-4<\/li>\n<\/ol>\n

                                 <\/p>\n","protected":false},"excerpt":{"rendered":"

                                  2023 K. Kweitsu. D.K. Sarkar, X.-G. Chen,\u00a0\u201cA Short Review on Superplasticity of Aluminum Alloys\u201d, Engineering Proceedings, 43 (2023) 43, doi.org\/10.3390\/engproc2023043043, 15th International Aluminium Conference, Qu\u00e9bec, QC, Canada, 11\u201313 October 2023 M. Tiwari, S. Noormohammed, X.-G. Chen,\u00a0D.K. Sarkar, \u201cSimultaneous anodization and silanization for adhesive joining of AA 3031 using an epoxy adhesive\u201d, Materialwiss. Werkstofftech. 54 … Continuer la lecture de Articles de Conf\u00e9rences<\/span> →<\/span><\/a><\/p>\n","protected":false},"author":89,"featured_media":0,"parent":0,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"","meta":{"footnotes":""},"tags":[],"_links":{"self":[{"href":"https:\/\/portfolio.uqac.ca\/xgrantchen\/wp-json\/wp\/v2\/pages\/165"}],"collection":[{"href":"https:\/\/portfolio.uqac.ca\/xgrantchen\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/portfolio.uqac.ca\/xgrantchen\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/portfolio.uqac.ca\/xgrantchen\/wp-json\/wp\/v2\/users\/89"}],"replies":[{"embeddable":true,"href":"https:\/\/portfolio.uqac.ca\/xgrantchen\/wp-json\/wp\/v2\/comments?post=165"}],"version-history":[{"count":8,"href":"https:\/\/portfolio.uqac.ca\/xgrantchen\/wp-json\/wp\/v2\/pages\/165\/revisions"}],"predecessor-version":[{"id":220,"href":"https:\/\/portfolio.uqac.ca\/xgrantchen\/wp-json\/wp\/v2\/pages\/165\/revisions\/220"}],"wp:attachment":[{"href":"https:\/\/portfolio.uqac.ca\/xgrantchen\/wp-json\/wp\/v2\/media?parent=165"}],"wp:term":[{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/portfolio.uqac.ca\/xgrantchen\/wp-json\/wp\/v2\/tags?post=165"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}